3-9
3
Taking pictures
3
Advanced exposure modes settings
The Advanced Exposure Modes settings allow you to select one of the following
modes:
✔ Programmed AE—uses the programmed automatic exposure setting
which selects the appropriate flash and aperture setting. This is the
default.
✔ Long-Time Exposure—the flash is disabled as it is assumed that the long-
time exposure is necessary to obtain a proper exposure within the current
ambient lighting environment. You set the exposure time between 0.5 and
16 seconds in 0.5 second increments.
✔ External Flash—disables the flash and uses the external flash sync to
provide the flash. You can set the camera aperture (or f/stop). The default
aperture setting is 5.6.
To select an Advanced Exposure mode:
1 Press to choose the exposure mode you
want to use.
2 Press Select.
✔ Programmed AE—the programmed
automatic exposure setting is used. This
is the default.
✔ External Flash—the External Flash
Setup screen appears. Press
to set
the aperture.
✔ Long-Time Exposure—the Long-Time
Setup screen appears. Press
to set
the exposure time.
3 Press Done.
If you set a new aperture or exposure time,
it appears on the status LCD on top of the
camera.
/
/
To Next Page
Loading...
