4-10
Copying marked pictures from camera to camera
You can send marked pictures to or receive marked pictures from another camera
in the Review mode.
1 Place the two cameras facing each other,
aligning their IrDA transceivers.
During Camera-to-Camera communication,
the cameras communicate using the IrDA
port.
2 Make sure both cameras are in the Review
mode.
3 Press Menu on the receiving camera.
4 Press to highlight Receive.
5 Press Menu on the sending camera.
6 Press to highlight Send.
7 Press Send.
8 The marked pictures are copied from one
camera to the other.
To Next Page
Loading...
