Kodak DC265 - Picture Card Adapter

7-9
7
Accessing pictures
Picture Card adapter
The DC265 camera uses a removable KODAK Picture Card that complies with
the CompactFlash standard. Due to the size of the CompactFlash card, most
PCMCIA card readers do not accept the card as is, but require an adapter card. A
KODAK Picture Card adapter is available for your memory card to adapt the
50-pin Kodak Picture card for use with 68-pin PCMCIA-ATA compatible
devices.
☞ For information on ordering a Picture Card adapter, see the Accessories
pamphlet, included with your camera.
To transfer pictures through the PCMCIA card:
1 Remove the KODAK Picture Card from the
camera.
Refer to “Removing and inserting the
memory card” on page 2-11.
2 Insert the memory card into the memory card
adapter.
3 Insert the memory card adapter into your
computer.
The memory card appears as a drive on your
computer.