Kodak DC265 - Connecting Your Camera to Your Computer

5-1
5
5
Connecting
5Connecting
your camera to
your computer
A first step to using your digital pictures on your computer is to connect your
camera to your computer. The camera can communicate with your computer
using:
✔ an RS-232 serial connection
✔ a Universal Serial Bus (USB) connection
✔ an IrDA (infrared) transceiver
While in Connect mode, the camera is controlled by the computer. Except for the
Mode dial, Power, Shutter, and Zoom buttons, all other camera buttons are
disabled. The Ready light indicates when the camera is on.
Once software is installed and the camera is connected to a computer, you are
ready to transfer the pictures.
☞ Use the AC adapter when connecting to your computer to conserve
battery power.