8-41
8
Exposure
1 Open the Palm door and
simultaneously press the
unlabeled button and the Drive
Mode Selector button.
AEB appears in the Top LCD
panel.
The display remains for six
seconds after you release the
buttons
2 Turn the Main dial to set the
desired bracketing amount.
The set bracketing amount is
shown in the Top LCD panel as
both a graphic level display and
a numerical value. The diagram
shows the case when setting a
bracketing amount of ±1-1/3
stops.
AEB
3 2 1 1 2 3
0
AEB
3 2 1 1 2 3
0
To Next Page
Loading...
