3-9
3
Power
Conditioning
From time to time you may need to condition (discharge) a battery. You would only do so
if a battery provides a noticeably shorter run time (less than 50% of normal capacity).
IMPORTANT:
Don’t condition your batteries too often or they will wear out prematurely.
1 Insert one or two batteries in the
battery charger slots.
2 Press the Condition buttons
associated with the batteries that
you wish to condition.
The battery will first be
conditioned, then charged. The
whole process can take up to
5 1/2 hours.
3 Remove the batteries from the
battery charger when the lights
turn green.
☛ You can condition a battery in
one slot while charging a
battery in the other.
To Next Page
Loading...
