Kodak DCS 500 Series

6-5
6
Configuring
Resetting Individual Custom Functions
Resetting All Custom Functions At Once
You can reset all custom functions to their default (0).
1 To reset a custom function to the
standard (default) setting, select
the custom function and then
press the CF button to change
the number in the Top LCD
panel to “0”.
2 Press the Shutter button halfway
to complete the setting and
restore the Top LCD panel to the
original display.
1 Set the Main switch to (A).
2 Open the palm door and press
the CF button.
3 Press the Clear button
3 2 1 1 2 3
0