2-18
Attaching the Lens
1 Remove the lens rear dust cap
and the camera’s body cap by
turning them counterclockwise.
2 Align the red dots on the lens
and camera body, then rotate the
lens clockwise until it locks in
place with a click.
3 Set the lens Focus Mode switch
to (AF).
☛ Autofocus is not possible
when the switch is set to (M).
☛ During autofocusing, do not
touch the rotating part of the
lens.
☛ Some Canon lenses are
manual focus only.
AF
M
8
0
m
m
1
:
1
4
AF
M
22
22
50mm
To Next Page
Loading...
