11-6
Setting Display Options
You can specify that areas of overexposure are highlighted. In addition, you can specify
that the exposure histogram and information about the image be displayed. (The histogram
is only displayed in Single Image Review mode.)
1 Select the Menu icon then
choose Main menu from the
dropdown menu (page 2-11).
2 Select Display Options from the
Main menu.
The Display Options screen
appears. A checkmark next to an
option indicates that the option
is on.
3 Press and hold the SELECT
button and rotate the Quick
Control dial to turn an option on
or off.
If you turned Highlighting on,
any overexposed areas of the
image blink.
☛ This is not necessarily a bad
thing. The highlighting
indicates areas where the pixel
code values exceed 255.
To Next Page
Loading...
