10-4
Maximum Continuous Shooting Speed in Different AF Modes
1
Open the palm door and press
the Drive Mode Selector button.
The current drive mode is
displayed in the Top LCD panel
for approximately six seconds
after you release the selector.
2 Turn the Main dial until the
desired drive mode is displayed
in the Top LCD panel.
3 To complete the setting, press
the Shutter button halfway or
wait until the six-second timer
elapses.
One-shot/Manual Al Servo
DCS 520 Approximately 3.5 frames/second Approximately 3.5 frames/second
DCS 560 1 frame/second 1 frame/second
To Next Page
Loading...
