A-3
Appendix A
Shooting Modes: 1) Shutter-priority AE (1/3-stop increments)
2) Aperture-priority AE (1/3-stop increments)
3) Depth-of-Field AE
4) Intelligent Program AE
5) A-TTL program flash AE
6) TTL program flash AE
7) Manual exposure
8) Bulb
9) E-TTL Program Flash AE
Metering Range: DCS 520: At normal temperature with 50mm f/1.4 lens at
ISO 200:
1) Evaluative metering, partial metering: EV -1 ~ 19
2) Fine spot metering: EV 2 ~ 19
DCS 560: At normal temperature with 50mm f/1.4 lens at
ISO 100:
1) Evaluative metering, partial metering: EV 0 ~ 20
2) Fine spot metering: EV 3 ~ 20
Usable ISO Range: DCS 520: ISO 200 - 1600
DCS 560: ISO 80 - 200
Exposure
Compensation
1) AEB:
+/-3 stops in 1/3-stop increments, shot according to
Drive mode in sequence of underexposure, correct
exposure, overexposure; repeatable, can be used with
self-timer for delayed 3-sequence exposure.
2) Manual compensation:
+/- 3 stops in 1/3-stop increments, by independent
operation of quick control dial or combination of
exposure compensation button + main dial; can be used
together with AEB.
AE Lock 1) Auto AE lock: occurs simultaneously with AF
completion in One-shot AF mode with evaluative
metering.
2) Manual AE lock is possible in all metering modes by
pressing AE Lock button.
EXPOSURE CONTROL
To Next Page
Loading...
