4
Chapter 1
Inserting a COMPACTFLASH Card
Think of KODAK COMPACTFLASH Cards as reusable film, or removable
computer memory that provides easy picture storage and transfer. See page 82
for card storage capacities.
To insert a card:
1 Turn off the camera.
2 Slide the card door in the direction of the
arrow on the door, then pivot open.
3 Hold the card so the connection end is
pointed into the camera and the raised lip
faces the back of the camera.
4 Slide the card into the card slot, then push
to seat the connector. Close the door.
CAU TION:
The card can only be inserted one way into the camera. Do
not force the card. It may damage your camera. Do not
insert or remove a card when the card access light is
blinking. Doing so may damage your pictures, card, or
camera.
To remove a card:
1 Turn off the camera.
2 Open the card door on the camera.
3 On the bottom of the camera, slide the Eject
button as illustrated and remove the card.
Use only certified cards that carry the COMPACTFLASH logo .
Additional KODAK COMPACTFLASH Cards can be purchased separately on our
Web site at http://www.kodak.com/go/easyshareaccessories.
Raised lip
Card door
Card
access light
Eject button
To Next Page
Loading...
Need help?
General
