7
Chapter 1
Setting the Clock
The camera has a built-in clock that maintains the date and time in a 24-hour
format. If the battery is removed from the camera for an extended period of
time, or is exhausted, you may need to reset the clock.
NOTE: It is important to set the correct date and time if you want to imprint the
date on your pictures (page 29).
1 With the camera turned on, turn the Mode
dial to Setup .
2 Highlight the Date & Time menu, then
press Select.
3 Press the arrow buttons to move
through the fields. Press the arrow
buttons to adjust the date and time settings.
4 Press Select to accept the changes.
To Next Page
Loading...
