5
Chapter 1
Turning the Camera On and Off
1 To turn on the camera, slide the power
switch to the On ( | ) position.
The built-in lens cover opens and the
Status Display turns on. If the Mode dial
is set to Capture ( ), the lens is
extended.
2 To turn off the camera, slide the power
switch to the Off ( ) position.
NOTE: The camera safely completes any Save,
Delete, or Copy operations that are in
process when the power is turned off.
Built-in Lens Cover
Your camera has a built-in sliding lens cover that protects the lens from dust
and scratches. The lens cover opens automatically whenever you turn on the
camera, and closes when you turn off the camera.
To Next Page
Loading...
