20
Chapter 2
Putting Yourself in the Picture
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time the picture is taken. This setting is ideal when you
want to include yourself in the picture.
1 Press the Self Timer button.
To cancel the Self Timer, press the Self
Timer button again.
2 Place the camera on a flat, steady surface or use a tripod.
3 Compose the picture, then press the Shutter button.
The Self Timer light, located on the front of the camera, turns on for
8-seconds, then blinks for 2 additional seconds before the picture is taken.
The Self Timer is turned off when you turn off the camera or change the
position of the Mode dial.
E
as
y
Sh
a
r
e
To Next Page
Loading...
