29
Chapter 3
Placing the Date on Pictures
Use the Date & Time Stamp setting to imprint the date, or the date and time, on
the lower-right corner of the picture.
NOTE: This setting is ideal for recording when a picture was taken; for
example, for a birthday or an insurance claim.
1 Make sure the camera clock is set to the correct time (see page 7).
2 Turn the Mode dial to Capture and press Menu.
3 Highlight the Date & Time Stamp menu , then press Select.
4 Highlight the Date Stamp option you want to
use (yyyy=year, mm=month, dd=day,
hh=hour, mm=minute). The camera
default is None.
5 Press Select to accept the change and return
to the Menu screen.
6 Press Menu to exit the Menu screen.
The next time you take a picture, the date
stamp is recorded in the lower-right
corner of the picture.
This setting remains until you change it
unless Reset User Settings is set to Yes (see
page 48).
To Next Page
Loading...
