Kodak EasyShare M577 - Solve Camera Problems

24 www.kodak.com/go/support
2 Solve camera problems
Go to www.kodak.com/go/m577support for the Extended user
guide, firmware updates, and answers to your questions.
Status Solution
The software installer
does not start
■ Choose right version for your computer
at www.kodak.com/go/camerasw.
Camera does not
turn on/off or function
■ Make sure the battery is installed
correctly and charged (see page 5).
LCD is too dark. ■ Adjust the LCD Brightness setting in the
Settings menu.
Short battery life ■ Make sure the battery is charged (see
page 5).
■ Limit the time you review pictures/videos
on the camera LCD.
■ Purchase a spare battery at
www.kodak.com/go/accessories.
Flash does not fire ■ The flash does not fire in all modes.
Change modes as needed (see page 19).
Computer does not
communicate with
the camera
■ Turn the camera off, then back on.
■ Make sure the battery is installed
correctly and charged (see page 5).
■ Make sure a KODAK Camera USB Cable,
Micro B / 5-Pin is connected to the
camera and the computer (see page 17).
Then turn on the camera.
urg_01219.book Page 24 Wednesday, March 9, 2011 11:52 AM