Setting up your camera
www.kodak.com/go/support
3
Storing pictures on an SD/SDHC Card
Your camera has enough internal memory for a couple of practice pictures. We highly
recommend purchasing a Class 4 or higher SD/SDHC Card (up to 32 GB) to
conveniently store more pictures/videos. (Card class is typically shown on the card
and/or packaging.) You must use a Class 4 or higher card to record HD video.
NOTE: Your camera also accepts Eye-Fi Cards, X2 or higher with a firmware version of 4.5174 or higher.
(View and update firmware using the Eye-Fi Center Software that accompanies the card.)
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card while the camera is on may
damage the pictures, the card, or the camera.
1 Turn off the camera, then open the door.
2 Insert a card until it clicks into place.
To remove a card, press and release it.
IMPORTANT:
When you turn on the camera, it checks to
see if a card is inserted. If pictures/videos
are detected in internal memory, the
camera prompts you to move them to the
card. New pictures/videos are stored on the
card.
Purchase memory cards www.kodak.com/go/accessories
To Next Page
Loading...
