16 www.kodak.com/go/support
Taking pictures/videos
Using the Self-timer/Burst button
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 Choose a setting:
10 seconds— A picture is taken after a 10-second delay (so you have
time to get into the scene).
2 seconds— A picture is taken after a 2-second delay (for a steady,
shutter release).
2 shot— The first picture is taken after a 10-second delay. A second
picture is taken 8 seconds later.
2 Compose the scene. Press the Shutter button and pause halfway down
halfway (to focus). Continue pressing the Shutter button until it’s completely
down (to start the self-timer).
The Self-timer light blinks until a picture is taken.
NOTE: Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button
completely down. When the self-timer is off, the icon shown is . You can also press the Menu
button (see page 45) to access this setting.
Press the Self-timer/Burst button to cycle through
available modes. The current mode appears at the
bottom of the LCD.
To Next Page
Loading...
