48 www.kodak.com/go/support
10 Printing pictures
Direct printing
You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.
IMPORTANT:
To print using PICTBRIDGE Technology, you must change the Computer
Connection setting (in the Settings menu) to Other Application (see
page 47).
Connecting the camera to a printer
1 Turn off the camera.
2 Use the USB cable (included with the camera) to connect the camera to the printer.
Printing
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.
2 Highlight a printing option, then press OK.
Current Picture—Press to choose a picture.
Tagged Pictures—If your printer is capable, print pictures marked for printing
(see page 49).
Index Print—Print thumbnails of all pictures.
All Pictures—Print all pictures in internal memory or on a card.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see page 36.
Purchase cables, accessories www.kodak.com/go/accessories
To Next Page
Loading...
