Taking pictures/videos
www.kodak.com/go/support
13
Using the Zoom
Use optical zoom to get closer to your subject before taking a picture or video. (If the
zoom button is pressed
during
video recording, then digital zoom is used.)
1 Use the LCD to frame your subject. (For focus distances, see Specifications,
page 59.)
2 To zoom in, turn the zoom clockwise, aiming the pointer at T (Telephoto “+”). To
zoom out, turn the zoom counter-clockwise, aiming the pointer at W (Wide Angle
“-”).
3 Take the picture or video.
NOTE: To get a focused picture every time, use the Focus brackets (page 9). You cannot zoom in Super
Macro focus mode (page 15).
To Next Page
Loading...
