20 www.kodak.com/go/support
Taking pictures/videos
Turning on the Date Stamp feature
You can turn on Date Stamp so that new pictures are stamped with the date taken.
IMPORTANT:
You can only add a date stamp when the camera is in a picture-taking
mode (not in Review mode when a picture is already taken). When you turn
on Date Stamp, all new pictures that you take are stamped until you turn
off the feature. Once a date stamp is applied, it cannot be removed (unless
you use image editing software).
1 If the toolbar is hidden, press to reveal it.
2 Press to highlight Date Stamp Off , then press OK.
3 Press to highlight Date Stamp On , then press OK.
The Date Stamp On icon appears in the toolbar. The date is stamped on pictures
you take next. The feature stays on until you turn it off.
To Next Page
Loading...
