Kodak EK6 User Manual

4. Close the film door firmly so that it latches
securely at both sides of the camera . The
EXPOSURE COUNTER will show the symbol
"[!]," indicating that the film cover is still
in place.
NOTE: We do not recommend removing and
reinserting a partially used film pack (or a
full
pack after the film cover has been eject-
ed) because at least one of your pictures
will be ruined. Also, when you reinsert the
pack , the exposure counter will be reset to
[!] . If you must remove a pack , see page
24 in the
Troubleshooting Guide .
EXIT SLOT
5. Press the SHUTTER RELEASE and allow it
to return. The
fil.m cover will be automatically
ejected through the EXIT SLOT . Be sure not
to obstruct the exit slot. Grasp the cover and
remove it.
The exposure counter will read
" 1. "
7
4. Close the film door firmly so that it latches
securely at both sides of the camera . The
EXPOSURE COUNTER will show the symbol
"[!]," indicating that the film cover is still
in place.
NOTE: We do not recommend removing and
reinserting a partially used film pack (or a
full
pack after the film cover has been eject-
ed) because at least one of your pictures
will be ruined. Also, when you reinsert the
pack , the exposure counter will be reset to
[!] . If you must remove a pack , see page
24 in the
Troubleshooting Guide .
EXIT SLOT
5. Press the SHUTTER RELEASE and allow it
to return. The
fil.m cover will be automatically
ejected through the EXIT SLOT . Be sure not
to obstruct the exit slot. Grasp the cover and
remove it.
The exposure counter will read
" 1. "
7

Kodak EK6 Specifications

General

Brand	Kodak
Model	EK6
Category	Film Camera
Language	English