What Happened
Subject not framed
properly
or
partly
cut
off.
Small
dark
(shadowy)
spots which appear in
same location on
consecutive prints.
Fogged pictures.
24
Probable Cause
Improper use of
viewfinder.
Dust on mirrors within
camera.
a.
Improper
handling of
film pack during
unwrapping
or
loading.
b. Film pack removed
and reinserted after film
cover has been ejected.
c. Film
door
opened in
bright sunlight after film
cover has been ejected.
Correcllon
View subject within
luminous frame in finder
(page 9).
With camera unloaded,
use a rubber syringe to
blow any dust from
inside camera.
a. Hold film pack by
edges only. Don't press
on film cover (page 6).
b. Avoid removing and
reinserting film pack. If it
is necessary to remove
pack,
do
it in subdued
light. Top picture will be
fogged.
c. If you must open film
door
, do it in subdued
light
to
avoid fogging
prints remaining in film
pack.
What Happened
Subject not framed
properly
or
partly
cut
off.
Small
dark
(shadowy)
spots which appear in
same location on
consecutive prints.
Fogged pictures.
24
Probable Cause
Improper use of
viewfinder.
Dust on mirrors within
camera.
a.
Improper
handling of
film pack during
unwrapping
or
loading.
b. Film pack removed
and reinserted after film
cover has been ejected.
c. Film
door
opened in
bright sunlight after film
cover has been ejected.
Correcllon
View subject within
luminous frame in finder
(page 9).
With camera unloaded,
use a rubber syringe to
blow any dust from
inside camera.
a. Hold film pack by
edges only. Don't press
on film cover (page 6).
b. Avoid removing and
reinserting film pack. If it
is necessary to remove
pack,
do
it in subdued
light. Top picture will be
fogged.
c. If you must open film
door
, do it in subdued
light
to
avoid fogging
prints remaining in film
pack.
To Next Page
Loading...
