ACCESSORIES
IMAGER REMOTE RECORD/STOP (cont.)
Assembling the RECORD/STOP connector.
Using the RECORD/STOP connector:
Setup the Processor and Imager for a recording session.
Press the READY key to arm the Processor for a recording.
When you are ready to start a recording, connect the RECORD
pin to the GROUND pin and the Processor will start
the recording.
To stop a recording, connect the STOP pin to the GROUND pin
and the Processor will stop the recording.
Rubber
Bushing
Pinch Ring
Carrier Sleeve
Insert
Carrier Sleeve
Sleeve
Coupling Ring
8.3
To Next Page
Loading...
