SPECIFICATIONS
KODAK EKTAPRO EM Processor
Keypad Back-lit LCD display provides user access
to all system functions.
Recording Technique Digital images stored in Dynamic
Random Access Memory (DRAM)
Recording Modes RECORD: Records images until memory
is full and then stops.
RECORD STOP: Continually records
images until STOP key is pressed.
RECORD TRIGGER: Continually records
images until a trigger signal is received,
saves operator programmed number of
images before trigger point and then
continues to record until memory is full.
RECORD ON COMMAND: Records
images at the selected record rate each
time signal supplied by the user is “true.”
May be used in conjunction with all
other record modes.
EXTERNAL SYNCHRONIZATION: Frame
start and interval between frames is
controlled by synchronizing signal
supplied by the user.
Record Rates 50, 125, 250, 500 and 1000 full
frames/second, Up to 12,000 split
frames per second.
Image Splits 1,2,3,4,6 or 12 splits per frame. Permits
(Model 1012 only) record rates of up to 12,000 pictures
per second. Can be played back with a
single image per frame or multiple
images per frame.
Exposure 1/50 to 1/12000 of a second depend
ing upon image split and record rate.
Will also support KODAK EKTAPRO
Intensified Imager with exposure rates
as fast as 10 microseconds.
8.4
To Next Page
Loading...
