LIVE
Then
Press
MENU
CONFIGURATION
MENU
17 : 21 : 35
12 / 25 / 90
To set the time of day press the
TIME DATE softkey.
This will change the TIME DATE softkey window from SET to a
two row display with the time in the first row and the date in the
second row.
The time stops incrementing when you select the time and date
display. The clock will start running again when the TIME DATE
softkey is pressed again.
The left and right arrow keys move the cursor over the field that
you want to change. Change the numbers in a field by using the
up and down arrow keys.
Set the time a minute or two ahead so that you can press the
TIME DATE softkey when your setting and the correct time
match. The time will be in HH:MM:SS format with the cursor over
the hour field. Use the up and down arrow keys to change the
hour to the correct value. Move the cursor to the minutes field
with the RIGHT ARROW key. Set the minute to the correct value.
Move to the seconds field and set a value.
Use the right arrow key to move the cursor to the month field
and then set the month using the up and down arrow keys.
Continue using the same procedure to set day and year. Press
the TIME DATE softkey to start the clock with your corrected
values.
5.19
To Next Page
Loading...
