SUMMARY
PROCEDURE FOR A TYPICAL
RECORDING SESSION
1. Connect the system components together and power on.
2. In LIVE select the record parameters.
a.) Record mode
b.) Record rate
c.) Exposure
d.) Imager(s)
3. Adjust the lens setting and the lighting to best capture
your event.
4. Make a recording.
5. Playback the recording.
6. Perform any analysis required using the DATA-FRAME Border
information.
7. Download any pictures you wish to keep for later review.
The next chapter will give you detailed information on how to
use the keypad to control each feature of your Motion Analyzer.
4.8
To Next Page
Loading...
