LIVE MENU
LIVE
SPLIT A/1
Press the SPLIT softkey and
then use the arrow keys to change
the number of splits.
NOTE
The KODAK EKTAPRO EM Motion Analyzer, Model 1000-E
does not have the split frame feature installed therefore the
SPLIT softkey will beep if you press it.
The up and down arrow keys are used to select Imager A or B, a
small arrow points to the selected Imager in the softkey window.
The left and right arrow keys change the number of splits for the
selected Imager. The SPLIT selected for Imager A can be different
than the SPLIT selected for Imager B.
The picture height is reduced by the SPLIT selected. For a SPLIT
of 2 the picture height is 1/2 of the image area, or for a SPLIT of
6 the picture height would be 1/6 of the image area. The picture
height can be SPLIT or reduced by a factor of 2, 3, 4, 6, or 12.
The image display area is filled in with a grey border above and
below the active picture as the different SPLIT values are selected.
FRAME -84
ET
-
000001.6800
PLAY 30
ID
02
REC
1000
EXP
3000
IMG
A/3
TIME 12:19:06 DATE 05/21/91
PIX
256
5.7
To Next Page
Loading...
