POWER ON
STOP
PLAY
LIVEREADY RECORD
MENU
REC
REC A : 50
RATE
IMG
SEL
IMG B
SIZE
A
NA
LIVE
REC TIME
24.5 SEC
EXP A : 1/50
SPLIT A / 1
IMG B
SIZE
NA
TRIG
NA
KEYPAD
While the Processor performs its power on self test the keypad
message field will display “System Initialization in Progress.” After
initialization is complete the keypad display should have each
value set as in the example below.
4.5
IF YOUR KEYPAD SELECTIONS ARE DIFFERENT
Press the LIVE key on either the keypad or the back of the
Imager. The keypad message field and the video monitor status
will display LIVE.
Press the key to the right of the selection that is different.
Press the up or down arrow key until your keypad selection is the
same as the example.
To Next Page
Loading...
