CONFIGURATION
MENU
LIVE
Then
Press
MENU
BORDER
ON
Press the BORDER softkey and
then press any arrow key once
to turn the DATA-FRAME Border
ON or OFF.
Some image processing equipment works better without a
DATA-FRAME Border present in the video.
The power on default for BORDER is ON.
ID
26
Press the ID softkey and then
use the arrow keys to change
the ID number.
The identification number, ID, is a two digit number stored
along with the pictures each time a recording is made. The ID
number is displayed in the DATA-FRAME Border.
In LIVE mode the ID number is the number that will be recorded
with the next recording. In PLAY mode the ID number displayed
belongs to the recording being viewed.
The power on default for ID is 01. The ID number will automati-
cally increment after each recording.
5.17
To Next Page
Loading...
