HOW THE PROCESSOR
STORES IMAGES
Memory is full
No more frames allowed
STOP
STOPS at
End Of Memory
RECORD
First Frame
Last Frame
Empty
Full
6.4
RECORD
The RECORD mode treats the memory as if it were a fixed length
and did not have the capability of recording over old images.
The recording stops after the last memory frame is loaded with a
video image.
You use the RECORD mode when you wish to start a recording
session manually. This mode is used when the experiment has
an observable start and you are interested in the action immedi-
ately after the recording is started. Don’t forget a mechanical
device takes time to react, so allow for about a 100 millisecond
delay from the time you see the event start until your finger
presses the RECORD key.
To Next Page
Loading...
