KODAK EKTAPRO
Imager
REMOTE REC/STOP
The remote record/stop connector allows you to start or stop a
recording remotely. Please see {IMAGER REMOTE RECORD/STOP
in Chapter 8 starting on page 8.2} for details on using the
Remote Rec/Stop connector.
VIDEO OUTPUT CONNECTOR
RCA type connector that provides the same video signal that
appears on the rear panel of the Processor. This video output
provides a way to connect a remote monitor to an Imager that is
a long distance from the Processor.
To be used only with the
KODAK EKTAPRO 1000 Processor
Serial No.
KODAK EKTAPRO 1000 Imager
EASTMAN KODAK COMPANY, Motion Analysis Systems Division
San Diego, CA 92121 Made in U.S.A.
HIGH GAIN
NORMAL
RECORD
STOP
MONITOR
HEADSET
Tripod
Mounting
Imager Cable
Not Used
Gain
Switch
Video Output
Connector
Remote Rec /Stop
Not Used
Not
Used
2.2
To Next Page
Loading...
