LIVE
LIVE MENU
EXP A: 1/50
B: 1/50
Press the EXP softkey and then
use the arrow keys to adjust
the exposure rate of the
Imagers.
The exposure number shown in the softkey window is the
amount of time that the sensor collects light for each frame,
measured in fractions of a second.
The longest exposure for each frame is equal to one divided by
the Record Rate. The shortest exposure for each frame depends
on the picture SPLIT selected. See Table 2. in the section explain-
ing SPLIT operation.
When the Processor is powered on the exposure time will return
to the same value that was in effect when power was turned off.
NOTE
When the RECORD RATE is changed, the EXPOSURE will also
change to a value of 1 divided by the Record Rate.
When a strobe light or a KODAK EKTAPRO Intensified Imager
is used, the amount of time that the sensor collects light will
be controlled by the strobe light duration.
The KODAK EKTAPRO Intensified Imager is not affected by
EXPOSURE. The KODAK EKTAPRO Intensified Imager expo-
sure time is controlled by GATE on the KODAK EKTAPRO
Intensified Imager Controller.
5.6
To Next Page
Loading...
