VIDEO
DISPLAY
2.12
4. TRIGGER INDICATOR
The word TRIG appears when the RECORD TRIGGER mode is
selected. A white box to the right of the word TRIG shows that
the Processor is receiving a trigger input signal.
5. RECORD ON COMMAND INDICATOR
The word ROC or BROC appears when a RECORD ON COM-
MAND feature is selected. A white box to the right of the word
(B)ROC shows that the Processor is receiving a ROC input signal.
A hollow white box means that at least one ROC input signal
occurred during the recording.
6. EXTERNAL SYNCHRONIZATION INDICATOR
The word SYNC appears when the EXT SYNC feature is on. A
white box to the right of the word SYNC appears briefly each
time an external synchronizing signal is received.
7. IDENTIFICATION NUMBER
The ID field shows the current ID in LIVE mode and the recorded
ID in PLAY mode. The ID can be changed using the keypad. The
ID automatically increments one after each recording. The ID
power on default is 01.
Some users have found that it is useful to keep a log of each
recording. Logging the DATE, ID and description of a shot saves
some time when you are trying to find a specific image later.
8. REC
The REC field shows the current record rate in LIVE mode and the
record rate of the recording in PLAY mode. A RECORD RATE of
1000 means that the Imager is taking pictures at 1000 pictures
per second.
There will be two REC numbers displayed when both imagers are
active. The top number will be the record rate for Imager A and
the bottom number will be for Imager B.
To Next Page
Loading...
