REC >|
STOP
LIVE
LIVE MENU
5.2
The Processor starts recording
and stops when the available
memory has been filled with
pictures.
The first frame recorded becomes frame zero. If the STOP key is
pressed before the Processor has filled available memory with
pictures the last picture or frame recorded becomes frame zero.
The frames recorded before frame zero will have negative frame
numbers. The playback will skip over any frames that do not
have pictures in them from the latest recording.
REC ——>|
REC ——>|
TRIG
∆
Press the REC softkey and then use the arrow keys to select one
of the following three options:
∆
The last frame recorded becomes frame zero. The frames re-
corded before frame zero will have negative frame numbers.
If STOP is selected before the Processor memory is full, the
number of playback frames will be less than the maximum
recording capabilities of the Processor.
The Processor stops recording once the correct number of
pictures before and after the trigger have been recorded. The
TRIG softkey is used to set the number of frames saved prior to
the trigger signal.
The Processor starts recording
and continues to record until
the STOP key is pressed.
The Processor starts recording
and continues to record until a
trigger signal is received.
To Next Page
Loading...
