HOW THE PROCESSOR
STORES IMAGES
You use the RECORD STOP mode when you wish to end a
recording session manually. This mode is used when the experi-
ment has an observable end and you are interested in the action
immediately before the recording was stopped. Remember to
allow for about a 100 millisecond delay from the time you see
the event end until your finger presses the STOP key.
Oldest frame
(removed)
Empty
Full
Removed
STOP
Only frames viewed during playback
RECORD
STOP
Newest
Frame
Stop
Oldest frame
(in memory)
Oldest frame
(in memory)
6.6
To Next Page
Loading...
