Printing
58 www.kodak.com/go/aiosupport
Changing the settings and printing pictures
You can change the print photos options for an individual picture or group of
pictures, or you can change the settings and save them as the default.
To print a picture or pictures using settings other than the default settings:
1. Load photo paper with the logo side facing up (see Loading the photo paper tray,
page 45), and move the paper edge guides until they touch the paper.
2. Insert the memory card into the appropriate slot, or connect the digital camera
or portable drive to the front USB port, then touch
View Photos.
IMPORTANT: Use only one slot or port at a time.
3. Touch or to locate the picture you want to print, then touch or to
select a quantity.
4. Repeat step 2 for each picture you want to print.
5. Press .
6. Touch or and touch the setting you want to change.
Print Photos Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Color Color (default) Prints full color.
Black & White Prints black and white (gray scale).
To Next Page
Loading...
