102 A-61560 January 2007
Opening the scanner
cover
• Press the scanner cover release lever and pull the scanner cover
down.
• When you finish cleaning the scanner or replacing a part, close the
scanner cover.
NOTE: The scanner cover cannot be opened when the input tray is in
the closed position or when the output tray has the output tray
extender attached to it.
IMPORTANT: Only use the tilt feature when the scanner cover is
closed.
Cleaning the rollers and
transport
1. With a roller cleaning pad, wipe the feed rollers from side to side.
Rotate the feed rollers to clean the entire surface.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate which can cause eye irritation. Refer to the MSDS
for more information.
2. Dry the rollers with a lint-free cloth.
To Next Page
Loading...
