38 A-61560 January 2007
Automatic feeding To scan a batch of documents, follow the guidelines for size, type,
quantity, etc., in the “Document preparation” section.
IMPORTANT: Staples and paper clips in documents may damage the
scanner. Remove all staples and paper clips before
scanning.
1. Align the leading edges of the stacked documents.
2. Position the leading edge of the documents centered and facing the
back of the scanner, as shown.
3. Adjust the input tray side guides.
4. Adjust the output tray position, if necessary.
5. Start scanning.
Manual feeding Follow the guidelines for document size, type, weight, quantity, etc.
Position the leading edge of the document you want to scan in the input
tray with the side you want to scan facing the input tray, then start
scanning.
To Next Page
Loading...
