A-61789/ISIS January 2016 13
Area
• Snap ⎯ enable this option to control the dimensions of the preview
area to fixed 0.3175 cm (1/8-inch) increments. This option is not
available in Pixels mode.
• X: the distance from the left end of the scanner to the left-edge of the
scanning area.
• Y: the position from the top end of the document to the top end of the
scanning area.
• Width: the width of the scanning area.
• Height: the height of the scanning area.
Units — select whether you want the area to be defined in Pixels,
Inches or Centimeters.
To Next Page
Loading...
