26 A-61789/ISIS January 2016
Scanner tab The Scanner tab provides the following options.
Document Feeder
Paper Source
• ADF: the input elevator is in the highest position. This selection is
recommended when you are scanning 25 sheets or less from the
input elevator.
• Flatbed: the scanner will scan from the flatbed.
Feeder Position
• Normal: looks for paper in the document feeder first. If there are no
documents in the input tray, the scanner will scan from the flatbed.
• 100 Sheets — this selection is recommended when you are
scanning between 25 and 100 sheets from the input elevator.
• 250 Sheets — this selection is recommended when you are
scanning between 100 and 250 sheets from the input elevator.
Automatic start transport — if selected, the scanner will wait for up to
10 seconds for documents to be placed in the input elevator before
scanning will begin.
Sheet Counter — enter the number to be assigned to the next physical
sheet of paper entering the scanner. This is incremented sequentially
by the scanner and is returned in the image header.
To Next Page
Loading...
