A-61789/ISIS January 2016 31
Imprinter tab The printer operates at full scanner speed. The printer can add a date,
time, document sequential counter, and custom messages.
The print string can be configured to include both literal (static)
information (i.e., information that stays the same for each document,
such as batch name or operator) and dynamic information (i.e.,
information that may change for each page scanned, such as the
document sequential counter). The capture software application
controls static fields; any information that the software allows you to
enter can be sent to the printer.
Digital Stamp: Mode — to enable this option, select Front Side.
Alignment — select where you want the print string to be placed.
Options are: Left, Center, Right.
Format Template — the format template is used to build the print
string. The print string is what is printed on documents as they travel
through the transport. The print string is printed before the document is
scanned, therefore, it is part of the image. The maximum amount of
characters for each print string is 40 characters (including spaces).
To Next Page
Loading...
