Kodak i3000 Series - Maintenance Procedures; Cleaning Tools and Materials

32 A-61789/ISIS January 2016
Date — if you want to add a date to the print string, select one of the
following formats:
• Format: MMDDYYYY, DDMMYYYY, YYYYMMDD, YYYYDDD or
DDD.
• Delimiter: select one of the following separators: slash: /,
dash: -, dot: . , space or none. For example: 08/24/2010,
08-24-2010, 08.24.2010 or 08 24 2010 or 08242010 (none).
Counter — if you want to add a Counter to the print string, you can
enter one of the following options:
• Field Width: used to control the width of the document counter.
Values range from 1 to 9.
• Format — allows you to configure the format of the counter when the
width of the value is less than the field width (the examples indicate a
field width of 3 and the counter at 4). Options are:
- Display Leading Zeros (default): “004”
- Suppress Leading Zeros: “4”
- Compress Leading Zeros: “ 4”
Top Margin — allows you to define the distance from the lead edge
before the print string begins. Enter the desired amount in the text box.
NOTE: Printing automatically stops 6.3 mm (1/4-inch) from the trailing
edge of the document even if the information has not been
completely printed.
Units — select Inches, Centimeters or Pixels.
Font — you can select what orientation you want your information to be
printed. Available character styles: Normal, Large and Bold.
Rotation — you can select either 0 or 90 degrees.
Example — shows a sample of what the print string will look like. As
you select items on the Imprinter tab, the corresponding portion within
the example will be highlighted.
Normal: 90° rotation Large: 90° rotation Bold: 90° rotation