22 A-61789/ISIS January 2016
Image Edge Fill tab This option fills the edges of the final electronic image by covering the
area with the specified color. Image Edge Fill is performed after all other
image processing options have been applied.
Fill Color — allows you to select the color to fill the edges with.
• None
•White
•Black
Frame Mode — fills in an equal amount of the selected color from the
Image Edge Fill drop-down list on all sides of the image, or you can
select a value in the Top, Left, Right and/or Bottom area(s) from each
side of the scanned image to be filled.
NOTE: When using Image Edge Fill, be careful not to enter a value too
large as it could fill in image data that you want to keep.
To Next Page
Loading...
