28 A-61789/ISIS January 2016
Maximum Length — enter a value that indicates the length of the
longest document in your document set.
NOTES:
• Changing this value will affect the maximums for the following
settings: Area - Width; Height; Printer - Offset From Lead Edge;
Multifeed - Length Detection.
• Not all combinations of settings are supported at the larger lengths
(i.e, resolution, color, grayscale, etc.). To allow for greater flexibility
with applications, the scanner will not generate an error until it sees a
document whose length is not supported.
• The scanner’s throughput may be reduced for larger lengths.
Power Saver — allows you to set the amount of time (0 to 240
minutes) the scanner will remain inactive before the scanner goes into
an idle state. The default is 15 minutes.
Power Off — allows you to set the amount of time (0 to 240 minutes)
the scanner will remain inactive before the scanner will turn the power
off.
To Next Page
Loading...
