A-61771 September 2016 9
2 Installation/First Scan
Setup
This section provides detailed information supporting the Installation Guide/
First Scan that is provided with your scanner. Follow these steps in the order
they are provided to install your scanner.
NOTES:
• If you have already performed all of the steps in the Installation Guide/First
Scan, skip this section.
• When positioning the scanner, be sure to provide adequate clearance at the
back of the scanner if you will be using the rear document exit or the Kodak
Printer Accessory.
• Before installing any software you must be logged in as the local PC
administrator if you are not using the CD auto start. You can do this by right-
clicking on the setup.exe program and select Run as Administrator.
1 Install software 1. Insert the Kodak i3000 Series Scanner Installation CD in the CD-ROM
drive. The installation program starts automatically.
2. Select Install Scanner Software.
To Next Page
Loading...
