38 A-61671 / TWAIN February 2013
9. Select Black and White (1-bit) for the Scan as option on the
General tab.
NOTE: Make any other adjustments to the back side settings on
the rest of the tabs on the Image Settings window.
10.When finished, select Home to return to the main Kodak Scanner
window and then select Save to save your selections to the
shortcut.
NOTE: If you selected any option other than Images per side: One in
Step 4, two Images to Configure option groups will become
available. You can then individually setup the images that will be
produced for each side of the document.
To Next Page
Loading...
