A-61671 / TWAIN February 2013 39
The Device Settings
window
From this window you can set all scanner-specific options, as well as
diagnostics, by using the available tabs. The values used in Device
Settings are saved in the selected Setting Shortcut. The Device Setting
window includes the following tabs by default: General, Printer and
Multifeed.
This section describes the TWAIN default interface (as it is presented
through the Scan Validation Tool). Your host application may modify the
interface by not displaying some tabs or limiting the options presented.
Home — returns you to the main Kodak Scanner window.
Image — displays the Image Settings window.
Preview — initiates a scan and then displays the Image Settings
window with the scanned image placed in the preview area. The image
displayed is a sample based on your current shortcut settings.
OK/Scan — when selected, you will be prompted to save any unsaved
changes.
NOTE: If this button is OK, any unsaved changes will remain in effect
for the current scan session.
Cancel — closes the main Kodak Scanner window without saving any
changes.
Information Icons
About: displays the scanners’ version and copyright information.
Help: displays help information for the window currently being
displayed.
To Next Page
Loading...
