A-61671 / TWAIN February 2013 3
Toolbar buttons.
Display Every ⎯ enter the sampling rate of the images you want to
display while scanning. For example, to see every image, enter a value
of 1. To see every 10
th
image, enter a value of 10.
Total ⎯ displays the total number of images scanned during the current
Scan Validation Tool session.
• To access the TWAIN Datasource (or ISIS driver), double-click the
Setup icon on the Scan Validation Tool dialog box to access the main
Kodak Scanner window.
Last File ⎯ displays the full path and file name for the last stored
image.
Setup — displays the user interface for the selected driver.
Destination — allows you to select a directory to store scanned
images and their file names. This option is only available when
Save Images to Files is selected.
Start Scanning — scans the documents in the input elevator.
Scan One Page — scans only one page.
Stop Scanning — ends the scan session.
License Key — displays the License Key window
No Image Display mode — closes the Image Viewer window
(no images will be displayed).
One Image Display mode — displays one image at a time.
Two Image Display mode — displays two images at a time.
Four Image Display mode — displays four images at a time.
Eight Image Display mode — displays eight images at a time.
About — displays the version of the Scan Validation Tool.
Transfer Mode selector — TWAIN only. For advanced
users. Allows you to select Memory or File Transfer
methods when using the Scan Validation Tool.
Show UI selector — This is an advanced option used by
Kodak Service.
To Next Page
Loading...
